1、在編輯myls.c文件時加入#include“apueerror.h”
apueerror.h代碼如下（復制粘貼後改為.h後綴的文件）
#include "apue.h"
#include <errno.h> /* for definition of errno */
#include <stdarg.h> /* ISO C variable aruments */
static void err_doit(int, int, const char *, va_list);
/*
* Nonfatal error related to a system call.
* Print a message and return.
*/
void
err_ret(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(1, errno, fmt, ap);
va_end(ap);
}
/*
* Fatal error related to a system call.
* Print a message and terminate.
*/
void
err_sys(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(1, errno, fmt, ap);
va_end(ap);
exit(1);
}
/*
* Fatal error unrelated to a system call.
* Error code passed as explict parameter.
* Print a message and terminate.
*/
void
err_exit(int error, const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(1, error, fmt, ap);
va_end(ap);
exit(1);
}
/*
* Fatal error related to a system call.
* Print a message, dump core, and terminate.
*/
void
err_dump(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(1, errno, fmt, ap);
va_end(ap);
abort(); /* dump core and terminate */
exit(1); /* shouldn't get here */
}
/*
* Nonfatal error unrelated to a system call.
* Print a message and return.
*/
void
err_msg(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(0, 0, fmt, ap);
va_end(ap);
}
/*
* Fatal error unrelated to a system call.
* Print a message and terminate.
*/
void
err_quit(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
err_doit(0, 0, fmt, ap);
va_end(ap);
exit(1);
}
/*
* Print a message and return to caller.
* Caller specifies "errnoflag".
*/
static void
err_doit(int errnoflag, int error, const char *fmt, va_list ap)
{
char buf[MAXLINE];
vsnprintf(buf, MAXLINE, fmt, ap);
if (errnoflag)
snprintf(buf+strlen(buf), MAXLINE-strlen(buf), ": %s",
strerror(error));
strcat(buf, "\n");
fflush(stdout); /* in case stdout and stderr are the same */
fputs(buf, stderr);
fflush(NULL); /* flushes all stdio output streams */
}
2、看到apueerror.h文件裏面包含了
#include <errno.h>
#include <stdarg.h>
這2個頭文件是吧
然後再把這2個頭文件添加到同壹個目錄下，具體代碼如下：
errno.h
#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#end
stdarg.h
#ifndef _STDARG_H_
#define _STDARG_H_
#ifndef RC_INVOKED
#ifndef _VA_LIST_DEFINED
#define _VA_LIST_DEFINED
#endif
#ifndef _VA_LIST
#define _VA_LIST
typedef char* va_list;
#endif
#define __va_argsiz(t)
#ifdef __GNUC__
#define va_start(ap, pN)
#else
#define va_start(ap, pN)
#endif
#define va_end(ap) ((void)0)
#define va_arg(ap, t)
#endif
#endif
3、最後工作目錄裏有下面這幾個文件就完全沒有問題了！
myls.c
apue.h
apueerror.h
errno.h
stdarg.h
dirent.h
搞定收工（dirent.h文件應該有吧，沒有照上述方法自己做壹個或者網上載個都很方便）