In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
Memory error at 80000000, wrote 00000000, read ffffffff !
POST done in 9 ms
Battery voltage: 4001 mV
Hit any key to stop autoboot: 0
Unknown command 'panic' - try 'help'
uboot > help
- alias for 'help'base - print or set address offset
bist - start Built In Self Test
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
go - start application at address 'addr'
help - print online help
idme - idme - Set nv ram variables
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
setenv - set environment variables
version - print monitor version
uboot > version
U-Boot 2009.08-lab126 (Feb 04 2020 - 07:55:13)
uboot > bootcmd_diags
Unknown command 'bootcmd_diags' - try 'help'
uboot > run bootcmd_diags
Wrong Image Format for bootm command
ERROR: can't get kernel image!