#define IMAGE_H
void image_info(FILE* file);
void image_save(FILE *file);
void image_gray();
void image_binarization();
void image_opposite();
void image_channel(); //抽取RGB通道
void image_bright();//改變圖像亮度
typedef struct BMP
{
//14字節
unsigned short bfType; //文件標識 2字節 必須為BM
unsigned int bfSize; //文件大小 4字節
unsigned short bfReserved1; //保留，每字節以"00"填寫 2字節
unsigned short bfReserved2; //同上 2字節
unsigned int bfOffBits; //記錄圖像數據區的起始位置(圖象數據相對於文件頭字節的偏移量)。 4字節
//40字節
unsigned int biSize; //表示本結構的大小 4字節
int biWidth; //位圖的寬度 4字節
int biHeight; //位圖的高度 4字節
unsigned short biPlanes; //永遠為1 , 2字節
unsigned short biBitCount; //位圖的位數 分為1 4 8 16 24 32 2字節
unsigned int biCompression; //壓縮說明 4字節
unsigned int biSizeImage; //表示位圖數據區域的大小以字節為單位 4字節
int biXPelsPerMeter; //用象素/米表示的水平分辨率 4字節
int biYPelsPerMeter; //用象素/米表示的垂直分辨率 4字節
unsigned int biClrUsed; //位圖使用的顏色索引數 4字節
unsigned int biClrImportant; //對圖象顯示有重要影響的顏色索引的數目 4字節
} BMP;
int line_byte;
unsigned char *imagedata;
extern BMP bmp;
extern int line_byte;
extern unsigned char *imagedata;
#endif
//image_rw.c文件
#include<stdio.h>
#include<stdlib.h>
#include"image.h"
void image_info(FILE *file)
{
int times=3; //輸入文件名次數。
char bmp_name[10]; //文件名
printf("\nplease enter a file name for reading:");
do
{
if (times<3)
{
printf("\nplease enter a file name for reading again:");
}
fflush(stdin);
gets(bmp_name);
//printf("\n%s",bmp_name);
file=fopen(bmp_name,"rb+"); //打開壹個文件進行讀寫操作。
--times;
if (file==NULL)
{
printf("\nerror opening %s for reading! ",bmp_name);
}
else
{
break;
}
}
while(times!=0);
if (times==0)
{
printf("\nsorry, shutdown!");
exit(1);
}
//讀取圖像信息
fseek(file,0L,0); //讀取圖像文件類型
fread(&bmp,sizeof(BMP),1,file);
printf("\n bmp tpye: %u",bmp.bfType);
printf("\n bmp size: %u",bmp.bfSize);
printf("\n bmp reserved1: %u",bmp.bfReserved1);
printf("\n bmp reserved2: %u",bmp.bfReserved2);
printf("\n bmp offBits: %u",bmp.bfOffBits);
printf("\n bmp bisize: %u",bmp.biSize);
printf("\n bmp biWidth: %d",bmp.biWidth);
printf("\n bmp biHeight: %d",bmp.biHeight);
printf("\n bmp biplans: %u",bmp.biPlanes);
printf("\n bmp biBitCount: %u",bmp.biBitCount);
printf("\n bmp biCompression: %u",bmp.biCompression);
printf("\n bmp biSizeImage: %u",bmp.biSizeImage);
printf("\n bmp biXPelsPerMeter: %d",bmp.biXPelsPerMeter);
printf("\n bmp biYPelsPerMeter: %d",bmp.biYPelsPerMeter);
printf("\n bmp biClrUsed: %u",bmp.biClrUsed);
printf("\n bmp biClrImportant: %u\n",bmp.biClrImportant);
line_byte=(bmp.biWidth*bmp.biBitCount/8+3)/4*4; //獲得圖像數據每行的數據個數
//printf("dfsa%u",bmp.line_byte);
//bmp.imagedata=NULL;
imagedata=(unsigned char*)malloc(bmp.biSizeImage);
fseek(file,(long)bmp.bfOffBits,0);
fread(imagedata,sizeof(unsigned char),bmp.biSizeImage,file);
fclose(file);
}
//保存圖像
void image_save(FILE *file)
{
int times=3; //輸入文件名次數。
char bmp_name[10]; //文件名
//int i; //記錄數據區個數
printf("\nplease enter a file name for writeing:");
do
{
if (times<3)
{
printf("\nplease enter a file name for writeing again:");
}
fflush(stdin);
gets(bmp_name);
printf("\n%s",bmp_name);
file=fopen(bmp_name,"wb+"); //打開壹個文件進行讀寫操作。
--times;
if (file==NULL)
{
printf("\nerror opening %s for writing",bmp_name);
}
else
{
break;
}
}
while(times!=0);
if (times==0)
{
printf("\nsorry, shutdown!");
exit(1);
}
//寫文件頭
printf("\n%s",bmp_name);
fseek(file,0L,0); //圖像文件類型
fwrite(&(bmp.bfType),sizeof(short),1,file);
printf("\n bmp tpye: %d",bmp.bfType);
fseek(file,2L,0); //圖像文件大小
fwrite(&(bmp.bfSize),sizeof(int),1,file);
printf("\n bmp size: %d",bmp.bfSize);
fseek(file,6L,0); //圖像文件保留字1
fwrite(&(bmp.bfReserved1),sizeof(short),1,file);
printf("\n bmp reserved1: %d",bmp.bfReserved1);
fseek(file,8L,0); //圖像文件保留字2
fwrite(&(bmp.bfReserved2),sizeof(short),1,file);
printf("\n bmp reserved2: %d",bmp.bfReserved2);
fseek(file,10L,0);//數據區的偏移量
fwrite(&(bmp.bfOffBits),sizeof(short),1,file);
printf("\n bmp offBits: %d",bmp.bfOffBits);
fseek(file,14L,0);//文件頭結構大小
fwrite(&(bmp.biSize),sizeof(int),1,file);
printf("\n bmp bisize: %d",bmp.biSize);
fseek(file,18L,0);//圖像的寬度
fwrite(&(bmp.biWidth),sizeof(int),1,file);
printf("\n bmp biWidth: %d",bmp.biWidth);
fseek(file,22L,0);//圖像的高度
fwrite(&(bmp.biHeight),sizeof(int),1,file);
printf("\n bmp biHeight: %d",bmp.biHeight);
fseek(file,24L,0);//圖像的面數
fwrite(&(bmp.biPlanes),sizeof(short),1,file);
printf("\n bmp biplans: %d",bmp.biPlanes);
fseek(file,28L,0);//圖像壹個像素的字節數
fwrite(&(bmp.biBitCount),sizeof(short),1,file);
printf("\n bmp biBitCount: %d",bmp.biBitCount);
fseek(file,30L,0);//圖像壓縮信息
fwrite(&(bmp.biCompression),sizeof(short),1,file);
printf("\n bmp biCompression: %d",bmp.biCompression);
fseek(file,34L,0);//圖像數據區的大小
fwrite(&(bmp.biSizeImage),sizeof(int),1,file);
printf("\n bmp biSizeImage: %d",bmp.biSizeImage);
fseek(file,38L,0);//水平分辨率
fwrite(&(bmp.biXPelsPerMeter),sizeof(int),1,file);
printf("\n bmp biXPelsPerMeter: %d",bmp.biXPelsPerMeter);
fseek(file,42L,0);//垂直分辨率
fwrite(&(bmp.biYPelsPerMeter),sizeof(int),1,file);
printf("\n bmp biYPelsPerMeter: %d",bmp.biYPelsPerMeter);
fseek(file,46L,0);//顏色索引數
fwrite(&(bmp.biClrUsed),sizeof(int),1,file);
printf("\n bmp biClrUsed: %d",bmp.biClrUsed);
fseek(file,50L,0);//重要顏色索引數
fwrite(&(bmp.biClrImportant),sizeof(int),1,file);
printf("\n bmp biClrImportant: %d\n",bmp.biClrImportant);
fseek(file,(long)(bmp.bfOffBits),0);
fwrite(imagedata,sizeof(unsigned char),bmp.biSizeImage,file);
fclose(file);
}
//pixProcess.c文件
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
#include"image.h"
//灰度化
void image_gray()
{
int i,j;
unsigned char tmp;
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte/3;j++)
{
tmp=0.11*(*(imagedata+i*line_byte+j*3+0))+0.59*(*(imagedata+i*line_byte+j*3+1))+0.3*(*(imagedata+i*line_byte+j*3+2));
imagedata[i*line_byte+j*3+0]=tmp;
imagedata[i*line_byte+j*3+1]=tmp;
imagedata[i*line_byte+j*3+2]=tmp;
//printf("\nnidsfh%d %d",i,j);
}
}
}
//二值化
void image_binarization()
{
int i,j;
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte;j++)
{
if ((*(imagedata+i*line_byte+j))<128)
{
imagedata[i*line_byte+j]=0;
}
else
{
imagedata[i*line_byte+j]=255;
}
}
}
}
void image_opposite() //反相
{
int i,j;
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte;j++)
{
imagedata[i*line_byte+j]=abs(255-imagedata[i*line_byte+j]);
}
}
}
void image_channel() //抽取RGB通道
{
int i,j;
char rgb;
printf("\nplease enter a char(r/g/b): ");
fflush(stdin);
scanf("%c",&rgb);
if (rgb=='b')
{
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte/3;j++)
{
imagedata[i*line_byte+3*j+1]=0;
imagedata[i*line_byte+3*j+2]=0;
}
}
}
else if(rgb=='g')
{
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte/3;j++)
{
imagedata[i*line_byte+3*j]=0;
imagedata[i*line_byte+3*j+2]=0;
}
}
}
else
{
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte/3;j++)
{
imagedata[i*line_byte+3*j]=0;
imagedata[i*line_byte+3*j+1]=0;
}
}
}
}
void image_bright()//改變圖像亮度
{
int level;
int i,j;
printf("\n please enter the level of brightness[-255 to 255] :");
fflush(stdin);
scanf("%d",&level);
for (i=0;i<bmp.biHeight;i++)
{
for (j=0;j<line_byte;j++)
{
if (level>=0)
{
if ((imagedata[i*line_byte+j]+level)>255)
imagedata[i*line_byte+j]=255;
else
imagedata[i*line_byte+j]+=level;
}
else
{
if ((imagedata[i*line_byte+j]-abs(level))<0)
imagedata[i*line_byte+j]=0;
else
imagedata[i*line_byte+j]+=level;
}
}
}
}
//void image_create() //創建壹幅24位BMP圖像文件。
//{
//main.c文件
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
#include<conio.h>
#include"image.h"
BMP bmp;
int main()
{
FILE *file=NULL;
int choose;
char gono;
do
{
image_info(file); //imagedata已經分配了動態內存，但是沒有釋放
printf("\n 1.image_opposite");
printf("\n 2.image_gray");
printf("\n 3.image_binarization");
printf("\n 4.image_channel");
printf("\n 5.image_brightness");
//printf("6.image_opposite");
//printf("7.image_opposite");
printf("\nchoose your options:");
fflush(stdin);
scanf("%d",&choose);
switch(choose)
{
case 1:
image_opposite();
image_save(file);
free(imagedata);
break;
case 2:
image_gray();
image_save(file);
free(imagedata);
break;
case 3:
image_binarization();
image_save(file);
free(imagedata);
break;
case 4:
image_channel();
image_save(file);
free(imagedata);
break;
case 5:
image_bright();
image_save(file);
free(imagedata);
break;
default:
printf("\n wrong choose!");
}
printf("\nlet's go on?(y/n):");
fflush(stdin);
scanf("%c",&gono);
if (gono=='n')
{
printf("\nbye bye!");
break;
}
}
while(1);
return 0;
}